CRYOGENIC CNC MILLING OF NEOPRENE RUBBER FOR RAPID PROTOTYPING

Abstract

Elastomer parts are widely used in engineering, but prototype production is difficult because molding methods require dedicated tooling and high cost. For low-volume manufacturing, CNC machining becomes a more flexible alternative. However, room-temperature machining of rubber is unstable because the material easily deforms under cutting forces. Earlier studies show that cooling the elastomer and using sharp down-cut tools significantly improve machinability. Since neoprene has a glass-transition temperature around −42°C, cryogenic milling below this level is a practical solution for temporary stiffening of the material [1].

PDF