Abstract
The dynamic characteristics of beam structures are strongly influenced by their geometric and material parameters. In this study, the effect of cross-sectional height on the natural frequencies of a rectangular cantilever beam is investigated using the finite element method implemented in ANSYS. A three-dimensional cantilever beam with a length of 140 mm and a width of 25 mm was considered, while the cross-sectional height was varied as 10, 12.5, and 15 mm. Structural steel with a Young’s modulus of 207 GPa, Poisson’s ratio of 0.30, and density of 8050 kg/m³ was used. Modal analysis was performed to determine the natural frequencies and corresponding vibration modes. The first six natural frequencies were obtained for each cross-sectional configuration. In addition, the model with a cross-sectional height of 12.5 mm was compared with previously reported numerical results to verify the developed finite element model. The results demonstrate that changes in cross-sectional height affect different vibration modes to different extents.