DESIGN AND NUMERICAL ANALYSIS OF A ROOM-SIZED VOLUMETRIC RESONATOR FOR UBIQUITOUS WIRELESS POWER TRANSFER
PDF

Keywords

wireless power transfer; volumetric resonator; ubiquitous charging; smart home; power transfer efficiency; impedance matching; lumped elements; CST Studio Suite.

How to Cite

Charoskhon Sevinchova, & Pavel Belov. (2026). DESIGN AND NUMERICAL ANALYSIS OF A ROOM-SIZED VOLUMETRIC RESONATOR FOR UBIQUITOUS WIRELESS POWER TRANSFER. GREAT BRITAIN - SCIENTIFIC REVIEW OF THE PROBLEMS AND PROSPECTS OF MODERN SCIENCE AND EDUCATION, 1(19), 15-22. https://e-conferences.org/index.php/GB/article/view/1556

Abstract

Conventional inductive wireless charging confines power transfer to a thin layer above a planar coil, requiring precise alignment and leaving pronounced dead zones in three-dimensional space. This paper reports the design and full-wave numerical analysis of a room-sized volumetric resonator intended for ubiquitous wireless power transfer (WPT) in a smart-home environment. A resonant structure occupying a 3.35 × 3.35 × 2.5 m volume was modelled in CST Studio Suite together with a compact receiver of height h = 70 mm and width a = 140 mm. Impedance analysis at the design frequency of 950 kHz yields an input impedance with a real part of Re(Z₁₁) ≈ 385.5 Ω and a vanishing reactive part, Im(Z₁₁) ≈ 0, confirming that the structure is resonant at the intended frequency. Post-processing of the complex port voltages and currents gives a power transfer efficiency (PTE) of 65.8% for the baseline receiver configuration; subsequent optimization of the receiver coil geometry raised this value to 72.87%. Magnetic field maps show a peak field of approximately 2.8 A/m, concentrated around the vertical conductive elements. It is emphasised that the resonant input impedance of ≈385.5 Ω is not matched to the 50 Ω source, so a dedicated matching network — realised through lumped reactive elements integrated into the resonator — is a prerequisite for physical implementation. The study is entirely numerical; the resulting design requirements and the scope of the experimental validation still needed are set out in detail.

PDF