EXPERIMENTAL OPTIMIZATION OF FINISHING PARAMETERS FOR IMPROVED ACCURACY AND SURFACE QUALITY OF SPUR GEAR TEETH
PDF

Keywords

Spur gears; shaving–rolling process; gear finishing; machining parameters; tooth flank accuracy; surface roughness; CNC turning.

How to Cite

B. K. Shakulov, & B. T. Mardonov. (2026). EXPERIMENTAL OPTIMIZATION OF FINISHING PARAMETERS FOR IMPROVED ACCURACY AND SURFACE QUALITY OF SPUR GEAR TEETH. USA- SCIENTIFIC REVIEW OF THE PROBLEMS AND PROSPECTS OF MODERN SCIENCE AND EDUCATION, 1(18), 10-14. http://e-conferences.org/index.php/usa/article/view/1505

Abstract

This study investigates the optimization of finishing parameters for improving the dimensional accuracy and surface quality of spur gear teeth processed by a combined shaving–rolling method. The experiments were conducted on a Vturn-46 CNC lathe using a specially designed two-axis fixture and a shaving–rolling tool manufactured from R6M5 high-speed steel. Spur gears made of 40Cr steel, with a module of 3 mm, 24 teeth, and a profile-shift coefficient of 1.4, were used as test specimens. Three workpiece rotational speeds—700, 450, and 200 rpm—were evaluated under constant feed conditions. Ten specimens were processed at each rotational speed to assess the repeatability of the results. Gear accuracy and flank surface roughness were used as the principal quality indicators. The experimental findings demonstrated that a reduction in rotational speed improved both parameters. Processing at 700 and 450 rpm produced an accuracy grade of 6–7 and an average surface roughness of Ra=1.6 μm . The best performance was achieved at 200 rpm, resulting in grade 6 accuracy according to GOST 1643-83 and a surface roughness of Ra=0.8 μm. The results confirm that shaving–rolling can be effectively implemented on universal CNC lathes as an alternative finishing method for the batch production of spur gears.

PDF