DESIGN OF KINEMATIC DRIVE SYSTEMS WITH A NON-STANDARD STRUCTURE.

Abstract

In the main drive and feed drives of metal-cutting machines, in addition to single-speed ones, multi-speed alternating current motors with stepwise variation of rotational speed are also often used.

To ensure a standard geometric series of rotational speeds (or numbers of double strokes of feeds), only motors whose rotational speed changes by a factor of 2 when switched can be used. For example: 750/1500; 1500/3000; 750/1500/3000 rpm, i.e., they form a series with φₑ = 2.

A multi-speed electric motor replaces one group of gear transmissions in the speed gearbox; therefore, it is considered as a fictitious group or an “electric group” with the number of speed steps pₑ equal to the number of its speeds and with characteristic xₑ.

PDF